How to Fit a Ghost Immobiliser
Are you looking for a way to prevent your car from being stolen? Ghost immobilisers are an excellent option. These devices are extremely hard to detect and operate in silence.
They can't be detected by radio signals or diagnostics and they communicate with the ECU through the CAN data circuit. This makes them difficult for thieves to get around using key relay technology or copying.
The Ghost Immobiliser has been approved by TASSA for insurance purposes
The Autowatch Ghost is a TASSA confirmed system that will protect your vehicle from theft. It is activated by connecting to the CAN network and then entering a unique PIN code with buttons that are factory-made on your dashboard or the steering wheel. It stops the engine from starting until the correct code is entered. It can also disable the starter motor and shut down parts like the fuel pump, so thieves can't take your car.
A TASSA-certified Ghost immobiliser is an affordable method to protect your vehicle. It also shields against hacking and signal relay attacks, which are the most common methods used by thieves to take cars. It also can reduce insurance premiums by as much as 20%. The device is not only effective against hackers, but also discrete and can't be detected by potential thefts. It's compatible with a variety of vehicles and makes it an ideal option for Birmingham drivers who want to protect their vehicles.
It's easy to install and doesn't require any cutting of wires or the addition of new key fobs. Instead, it connects to your vehicle's data network and relays inputs to the ECU. This means that it is impossible to replace the ECU or to add new key fobs. The Ghost emits no radio signals and does not employ diagnostics. This makes it undetectable by scanners.
The Autowatch Ghost immobiliser is the most advanced on the market. It is able to prevent vehicle theft. It is a highly effective system that sends a secure signal to ECU and prevents the vehicle from starting if the right pin is not entered. It is fully programmable, so you can change the PIN whenever you want. It also has an Anti-Hijack Mode that stops cloning and jamming of signals.
You can also link the Ghost to a tracker in order to protect your vehicle from theft and other criminal acts. The tracking system will provide the location of your vehicle in real time and permit you to report any suspicious activity to police. The tracker can also be used to locate your car if it is vandalized or stolen.
It's simple to find the right size
Ghost systems can directly communicate with the ECU of your car, in contrast to an immobiliser fitted by the manufacturer that relies on a chip that is in your key fob. It is completely undetectable by hi-tech diagnostic tools, and does not use radio signals. It will disable the vehicle's fuel system or starter motor, preventing it from starting.
This will also prevent the ECU accepting any new codes entered through the OBD port. This will prevent thieves from adding new key fobs or re-installing the ECU to take away your joy and pride.
Ghost systems are also extremely difficult to hack since there aren't any visible cables or physical anti-theft devices. This is why it's such an effective method to keep your car safe and secure.
The Autowatch Ghost system connects to your car's CAN and is programmed using a unique PIN code that must be entered to allow the J to be driven. The system is not visible to hi-tech burglars and has no LED indicators. It is completely silent and works through buttons in your car, such as those on the steering wheel and door panels as well as the central consoles.
A complete demonstration of the system is performed by a Tassa Registered Ghost Installations team member before you leave, along with the Owner's Manual and Emergency Card, as well as two Autowatch Window Stickers and an Installation Certificate and Security Guarantee. The system can be deactivated to allow for valet servicing and parking, then quickly activated when the vehicle is located.
It's low maintenance
The Ghost Immobiliser is an aftermarket security device that can be installed on a wide range of vehicles. It is easy to install because it doesn't require any additional sensors or keyfobs.
It's also less maintenance-intensive than a tracker, since it does not transmit RF signals or pulses like a standard GPS device does. This means that thieves can't detect the Ghost immobiliser using the RF scanning technology or code grabbing. The system is built on the CAN network, which means it cannot be altered using conventional tools. It can only be deactivated by entering the correct PIN code.
To steal your vehicle, a thief must know the specific sequence of disarming of your Ghost immobiliser. This will be a series buttons that are pressed on the steering wheel, door panels or console. This makes it very difficult for them to determine what you'll press and can stop the car from getting started.
The Ghost Immobiliser also uses a smart phonetag' that's attached to your keys and connects via Bluetooth with the base unit of your car. The tag can be programmed to disarm at any time by the user. It is activated via an app on your phone when you are within range of your car. You can also activate the system by calling the app to find your vehicle. The app will show the vehicle identification number that can be used to safeguard your vehicle from theft.
The Ghost immobiliser is a great choice for those who regularly hand over their vehicle to valet parking or for servicing. Our installers will demonstrate how the system works. They will also give you an Ghost emergency card, an owner's manual, and insurance certificates.
Another benefit of the Ghost immobiliser is that it can be transferred to a new vehicle if you change vehicles in the course of ownership, if your new vehicle is compatible with the Ghost system first. This is a very convenient feature that gives you peace of mind if you decide to sell your vehicle.
It's extremely difficult to discern
A Ghost Immobiliser prevents thieves from starting your car by requiring an unique PIN code that only you are aware of. They won't be able to drive away with your joy and pride and instead must physically remove the vehicle. It can work in conjunction with a car tracker for finding your vehicle. The device is hidden within the vehicle and does not emit LED indicators or radio signals so that it's not visible to thieves. It is discrete and doesn't require additional wiring, so it can be fitted without causing any damage to your vehicle.
The device is hidden within the vehicle and functions with the onboard CAN data circuit. It communicates with the ECU in the vehicle and does not rely on key-fobs or other sensors to function. It is able to stop thieves from bypassing the system with the use of a new key or by replacing the ECU. The system will not start your vehicle without the proper pin code.
This device was developed by Autowatch the South African technology leader. They are at the forefront of creating the most advanced security systems, and this product is a prime example. This system guards you against the latest technology for keyless contact that includes hacking, cloning, and key theft.
It's able to accomplish this because it is communicating with the ECU on the vehicle's data bus. It is completely silent and does not transmit any signals, therefore it is not able to be detected by codes-grabbing devices or RF scanners used by high-tech thieves. It also makes use of the buttons in your vehicle to enter a PIN code, so it isn't as susceptible to tampering like traditional immobiliser relays.
ghost immobiliser problems is a great method to increase your car's security and provide peace of mind while driving. It's a small cost to help you avoid the heartache that comes with losing your love and pride stolen. Contact us today to learn how we can help protect your car by using our TASSA verified Ghost immobiliser.